Banjo & Mandolin VST / VST3 / AU
Banjodoline is a Virtual Banjo and Mandolin VST and
VST3 plugin software, including a Mandocello,
Mandola, Octave Mandolin, Banjolin and Electric
Mandolin fretted stringed instruments emulation.
Available in 32 bit and 64 bit
loader to select between different instruments:
Preset Sounds /
Banjolele Banjo Uke
envelope generator with Attack, Sustain, Decay and
Ø Attack determines the time it takes for the note to get
to the maximum level.
Ø Decay determines the time it takes for the note to go
from the maximum level to the sustain level
(controlled by Sustain).
Ø Sustain determines level the sound is played at while
the note is held (after the other envelope states,
Attack and Decay, have been completed).
Ø Release determines the time it takes for the note to
fall from the sustain level to zero (silence) level
when it is released.
Bend: The Pitch Bend knob directly changes the pitch of
the selected instrument.
Ø Pitch Bend center position: is normal pitch.
Ø Pitch Bend down: Specifies the amount of pitch change
that will occur when the pitch bend/modulation lever
is moved to the left.
Ø Pitch Bend up: Specifies the amount of pitch change that
will occur when the pitch bend/modulation lever is
moved the right.
Low-Frequency Oscillator Controls: These knobs apply LFO
modulation to the selected instrument. Use the ‘Rate’
(Frequency) and ‘Depth’ (Amplitude) knobs to adjust the
LFO effect as required. By using the LFO to modulate
various aspects of the audio signal, you can apply
effects such as vibrato or tremolo.
• Virtual Reverb Room built-in: free variation of
acoustic ambience thanks to complete separation of organ
and room. Small rooms can be modeled as well as large
Type. Combo box to switch between the following options:
Ø Low Pass (LPF): a filter that passes signals with a
frequency lower than a certain cutoff frequency and
attenuates signals with frequencies higher than the
Ø High Pass (HPF): a filter that passes signals with a
frequency higher than a certain cutoff frequency and
attenuates signals with frequencies lower than the
Ø None: No filter is applied.
Ø Cutoff Frequency Filter: Sets the cutoff frequency for
the low pass and high pass filters.
Amplitude Range Controls: The sensitivity level is set
by the user:
500 MHz Processor (Pentium®, Celeron®
AMD® or equivalent) minimum.
512 MB or higher recommended.
VST compatible host / Digital Audio Workstation
DAW/ MIDI Sequencer:
These VST/VST3 software can be "plugged in" to any host application that supports VST/VST3
Technology like: Image-Line FL Studio, Steinberg Cubase Pro, Artist and
Elements, Cakewalk by BandLab, Ableton Live, Cockos REAPER, PreSonus Studio One,
Acoustica Mixcraft, MAGIX Acid Pro, MakeMusic
Finale, Avid Sibelius, Mackie Tracktion, Steinberg Nuendo, Magix
Samplitude, Magix Music Maker, Cantabile (Lite, Solo, Performer), n-Track
Studio, VSTHost, DarkWave Studio, Bitwig, SAVIHost and much more
MIDI Controller Device: A MIDI Controller is
required to play this VST instrument. The most common type of device in this
class is the keyboard controller. After launching the Digital
Audio Workstation or MIDI host application be sure to select the appropriate
MIDI device before attempting to play your MIDI controller.
An ASIO® soundcard is recommended for
low latency real-time play.
test extensively the demo version of your selected product (s) in your
make sure there are no misbehaviors before purchasing.
the Unregistered/Demo Version:
The VST2 and VST3 Plugins DEMO versions is only meant to give you a
taste of what is possible with the Banjodoline in a limited range of an
octave ‘C4-C5’ with random ‘white noise’, where Middle C equals C4.
full version is available to purchase, as downloadable software, the
price is US$34,50,
and you can download the full version as soon as your payment is